Apple’s 40W Dynamic Power Adapter with 60W Max is an unusual charger. Its single USB-C port can deliver more power than the 40W name suggests, but only temporarily. It also supports USB Power Delivery 3.2 with Adjustable Voltage Supply, while leaving out PPS entirely.
For this review, I tested the European A3352 version with retractable round plug pins. That distinction matters: the dimensions, weight and plug mechanism described here belong to this EU model, rather than the US version with flat pins. The A3352 is now available in Germany, where Apple lists it at €45.
The measurements make a strong case for its electrical performance: 90.83 % average efficiency across twelve load points, low idle consumption and little voltage sag. Whether it is the right charger for you comes down to the device you use and how much continuous power you need.
Apple A3352 EU design and retractable plug
The A3352’s most distinctive feature is its plug mechanism. Press the button on top to release the round EU pins; when packed away, the pins retract into the body. The resulting smooth shape is convenient in a bag, with no exposed pins to catch on other items.
Apple keeps the rest of the design simple: glossy white surfaces, a grey centre section and one USB-C port. The housing feels exceptionally solid, with none of the flex or flimsy construction you sometimes find on smaller chargers.
| Measured specification | EU model A3352 |
|---|---|
| Dimensions | 68 × 45.5 × 28 mm |
| Housing volume | 86.6 cm³ |
| Weight | 108 g |
| Mains plug | Retractable round EU pins |
| USB ports | 1 × USB-C |
| Continuous output | 40 W |
| Maximum dynamic output | 60 W |
| Idle power consumption | 0.08 W |
At 108 g and 86.6 cm³, this is a reasonably sized 60W-class adapter, but a fairly substantial 40W charger. Several of the 65W models in my comparison are smaller and lighter. The retractable plug adds practical value, rather than making the A3352 the most compact option.
Housing volume comparison. The EU A3352 measures 86.6 cm³; this chart compares volume, rather than individual dimensions.
Weight comparison. The European A3352 weighs 108 g.
40W continuous output and 60W dynamic power explained
The two power ratings describe different operating conditions. Apple rates the adapter for 40W continuous output, with up to 60W available dynamically. In my load test, it maintained the 60W operating level for roughly 25 minutes before reducing output to 40W.
This behaviour uses the Dynamic Power Source approach in USB PD 3.2. The higher output is a temporary capability, rather than a promise of unlimited 60W operation. I appreciate Apple making that distinction explicit: it gives you a more useful specification than a headline wattage that quietly disappears once a charger warms up.
The approximately 25-minute result applies to my test conditions. It is not a fixed boost timer for every device or environment. Actual charging also depends on what the connected device requests; a phone’s demand will usually change as its battery fills.
The adapter also supports conventional fixed-voltage USB PD charging. A device does not need AVS to use those profiles or request the higher initial output. When available power is reduced, a device without support for the dynamic behaviour may experience a brief charging interruption during renegotiation.
USB PD profiles and compatibility
| USB-C fixed profile | Maximum advertised current | Nominal maximum power |
|---|---|---|
| 5 V | 3 A | 15 W |
| 9 V | 3 A | 27 W |
| 15 V | 3 A | 45 W |
| 20 V | 3 A | 60 W |
These are the initial fixed USB PD capabilities; they do not override the 40W continuous rating. The highest profile is useful for compatible tablets and USB-C laptops, as well as phones that can request higher charging power.
The A3352 is not restricted to Apple hardware. Other USB PD devices can negotiate a compatible voltage, too. For a laptop, though, I would choose it with the 40W sustained limit in mind. It is a more convincing option for light use and battery top-ups than for powering a demanding notebook at full load.
SPR AVS support and iPhone 18 Pro Max charging
AVS stands for Adjustable Voltage Supply. It lets a compatible device request an adjustable output voltage instead of relying exclusively on fixed USB PD voltage steps. This adapter supports AVS within the Standard Power Range, a feature associated with USB PD 3.2.
That is now more than a feature for hypothetical future hardware. Apple’s current charging guidance specifies an AVS-capable adapter with at least 60W maximum output, together with a USB-C cable rated for 60W or more, for faster wired charging of the iPhone 18 Pro and iPhone 18 Pro Max. Apple names this Dynamic Power Adapter as an example.
In my separate iPhone 18 Pro Max charging test with and without SPR AVS, I also confirmed that the Apple A3352 activates AVS with the phone. That matters because some other chargers advertise the correct AVS profile but still fall back to fixed-voltage USB PD.
The same comparison shows where AVS makes a practical difference: the iPhone reached around 52 W with working SPR AVS, versus approximately 43–45 W without it. AVS helped with short top-ups, while both full-charge runs finished in about 70 minutes. These are results from the separate phone test, rather than a full charging run conducted as part of this adapter review.
No PPS support for Samsung Galaxy and Google Pixel
The main compatibility drawback is the lack of Programmable Power Supply, or PPS. AVS and PPS are separate capabilities, and support for one does not imply support for the other.
Many Samsung Galaxy and Google Pixel phones use PPS to reach their higher charging rates. They can still charge from the A3352 through a compatible fixed USB PD profile, but models that depend on PPS will not get their best charging performance here. The exact fallback speed depends on the phone.
For a mixed collection of Apple and Android devices, I would favour a charger that offers both PPS and AVS. For an Apple-focused setup, the omission is less of a concern.
Apple A3352 voltage stability under load
I measured output voltage from no load to 3 A on the 5V, 9V and 20V fixed profiles. All readings stayed within the limits used in the test, with a smooth, modest decrease as current increased.
| Nominal profile | No load | At 3 A | Voltage drop |
|---|---|---|---|
| 5 V | 5.171 V | 5.038 V | 0.133 V |
| 9 V | 9.023 V | 8.890 V | 0.133 V |
| 20 V | 19.938 V | 19.760 V | 0.178 V |
Output voltage against load current on three fixed USB PD profiles. Each panel uses its own voltage scale; the dashed line marks nominal voltage.
The 20V profile loses only 0.178 V between no load and 3 A, equivalent to about 0.89 % of nominal voltage. The 5V and 9V readings also show little sag. This is reassuring load regulation, although these readings do not constitute a ripple or transient-response measurement.
Apple A3352 efficiency and idle consumption
The A3352 performs particularly well on conversion efficiency. Across twelve measured fixed USB PD load points, results range from 87.8 % to 92.6 %. The arithmetic mean is 90.83 %, or 90.8 % rounded to one decimal place.
AC-to-USB conversion efficiency at twelve fixed-voltage load points. The headline value is an unweighted mean of those measurements.
The lowest result occurs at 5 V / 1 A, where USB output power was 5.153 W and mains input was 5.87 W. Even at this light load, efficiency remains close to 88 %. The best result is at 20 V / 2 A: 40.143 W output from 43.33 W input, or 92.6 %.
At the 20 V / 3 A test point, the power readings were 57.53 W on the USB side and 62.3 W at the wall, giving 92.3 % efficiency. Those are the recorded power measurements, rather than an assumption that the nominal 60W profile always delivers exactly 60.0 W. Voltage-stability readings and efficiency power readings are separate measurement sets.
Average efficiency comparison. Test load profiles may differ between chargers, so these averages provide context rather than a direct comparison at identical loads.
In this efficiency comparison, the A3352’s 90.8 % average sits just below the UGREEN Nexode Air 65W Mini at 91.2 %, and above the Anker A121A Nano 70W at 90.2 %. It is a strong showing, especially because Apple maintains good efficiency at the lower-power test points.
Idle consumption was just 0.08 W in my measurement. That is very low, but still a measured value rather than zero consumption.
Verdict on the Apple A3352 EU charger
The European Apple 40W Dynamic Power Adapter with 60W Max is a well-built single-port charger with excellent measured efficiency. Its retractable round pins are useful for travel, the output voltage remains stable under load, and Apple clearly distinguishes temporary 60W output from 40W continuous operation.
I particularly like how consistently it performs across the efficiency measurements. A charger that remains efficient at around 5W is useful beyond its headline maximum, while the 0.08W idle draw makes it an unobtrusive option to leave plugged in.
For an iPhone-focused setup, including newer models that can use AVS, the A3352 makes sense. It can also charge an iPad or a compatible USB-C laptop, provided the 40W sustained limit suits your usage. For PPS-dependent Android phones, or a notebook that needs a steady 60–65W, I would choose a different adapter.
At €45, it is relatively expensive for one USB-C port and 40W continuous output. You are paying for the solid construction, Apple integration and retractable EU plug as much as the wattage. If those are your priorities, the A3352 is a good choice; if size, multi-device charging or Android fast charging comes first, it is less compelling.
Pros
- Excellent efficiency with a 90.83 % mean across twelve load points
- Very low measured idle consumption of 0.08 W
- Stable fixed-voltage output under load
- Solid housing and retractable EU plug pins
- USB PD 3.2 with SPR AVS and clearly stated dynamic output
Cons
- No PPS for phones that rely on it for their fastest charging
- 40W continuous output despite the 60W maximum
- Only one USB-C port
- Several 65W competitors are smaller and lighter
- €45 is a premium price for this output and port count
Apple 40W Dynamic Power Adapter with 60W Max — German product page













