A good LiFePO4 battery needs to do more than print a large Ah number on its label. It should deliver that capacity under load, suit the voltage of your system and let you keep track of the energy you have left.
This LiFePO4 battery comparison for 2026 brings together capacity measurements for 22 batteries, from compact 100Ah packs to larger 280Ah models. My preferred option for a high-capacity 12V setup is the LiThink 280Ah, while smaller Bluetooth-equipped packs and basic 24V batteries make more sense for other installations.
About the results: The comparison draws on my battery testing originally carried out for Techtest.org. Not every model has a separate English review on Charge-Test. Existing Charge-Test reviews are linked where available; other product links lead to the manufacturer’s website. This is a comparison of existing measurements, rather than a new simultaneous test of all 22 batteries.
Affiliate disclosure: This article includes affiliate links to LiThink. If you buy through one of these links, I may receive a commission at no extra cost to you.
My pick for a high-capacity 12V system: LiThink 280Ah
It combines the highest relative capacity result in this comparison with Bluetooth monitoring and self-heating. It is also the battery I use in one of my own off-grid solar systems.
Check the LiThink 280Ah at the official store
Affiliate link — I may earn a commission at no extra cost to you.
Prefer the details first? Read the full LiThink 280Ah review.
Which LiFePO4 battery should you shortlist?
Start with your installation, rather than the capacity ranking. A large battery that does not fit your camper, or a 24V pack for a 12V inverter, is the wrong purchase even if its test result is excellent.
| Your priority | Where I would start | Main consideration |
|---|---|---|
| High capacity for a 12V solar system | LiThink 12V 280Ah | My preferred large 12V option; check available space and the charging setup. |
| A smaller everyday battery | Bluetooth versions from LiTime, Power Queen, Redodo or WattCycle | Compare the exact model: features vary within each brand. |
| A camper battery with a German point of contact | JUBE-Tech JU-12150 | H8/DIN8 format and Bluetooth access protection; a higher purchase price. |
| A straightforward 24V storage battery | Dynesspower 24V 100Ah | Strong capacity result, but no Bluetooth or built-in status display. |
Measured capacity: do the batteries meet their ratings?
The table compares measured Ah divided by rated Ah. A result of 100% means that the claimed charge capacity was met. A higher figure means the sample delivered more Ah than advertised.
This percentage is not efficiency. It is also not a ranking by total stored energy, maximum output or overall quality. Test loads and procedures differ between the original reviews, so small differences should not be treated as decisive.

| Battery / further information | Nominal voltage | Rated capacity | Measured average | Measured / rated |
|---|---|---|---|---|
| LiThink 12.8V 280Ah | 12.8 V | 280 Ah | 308.25 Ah | 110.09% |
| Supervolt 12.8V 100Ah (manufacturer) | 12.8 V | 100 Ah | 110.00 Ah | 110.00% |
| JUBE-Tech JU-12150 150Ah (manufacturer) | 12.8 V | 150 Ah | 160.93 Ah | 107.29% |
| LiTime 12V 100Ah (manufacturer) | 12.8 V | 100 Ah | 106.06 Ah | 106.06% |
| Dynesspower 24V 100Ah | 25.6 V | 100 Ah | 105.57 Ah | 105.57% |
| Power Queen 12.8V 100Ah (manufacturer) | 12.8 V | 100 Ah | 105.23 Ah | 105.23% |
| Power Queen Group 24 Smart 100Ah (manufacturer) | 12.8 V | 100 Ah | 104.26 Ah | 104.26% |
| Vatrer 100Ah with app / self-heating (manufacturer) | 12.8 V | 100 Ah | 104.20 Ah | 104.20% |
| Geleipu 25.6V 100Ah (manufacturer) | 25.6 V | 100 Ah | 103.75 Ah | 103.75% |
| Creabest 100Ah with Bluetooth (manufacturer) | 12.8 V | 100 Ah | 103.46 Ah | 103.46% |
| WattCycle Mini 100Ah with Bluetooth (manufacturer) | 12.8 V | 100 Ah | 103.10 Ah | 103.10% |
| WattCycle Under-seat 100Ah with Bluetooth (manufacturer) | 12.8 V | 100 Ah | 102.74 Ah | 102.74% |
| LiTime 100Ah for trolling motors (manufacturer) | 12.8 V | 100 Ah | 102.67 Ah | 102.67% |
| Redodo 165Ah with Bluetooth | 12.8 V | 165 Ah | 169.13 Ah | 102.50% |
| LiTime Group24 100Ah (manufacturer) | 12.8 V | 100 Ah | 102.46 Ah | 102.46% |
| ECO-Worthy 12V 100Ah (manufacturer) | 12.8 V | 100 Ah | 101.82 Ah | 101.82% |
| LiTime Mini 100Ah (manufacturer) | 12.8 V | 100 Ah | 101.56 Ah | 101.56% |
| Redodo 12V 200Ah (manufacturer) | 12.8 V | 200 Ah | 201.22 Ah | 100.61% |
| CREABEST VB046 175Ah (manufacturer) | 12.8 V | 175 Ah | 175.41 Ah | 100.24% |
| Power Queen OTCB Smart 100Ah (manufacturer) | 12.8 V | 100 Ah | 98.40 Ah | 98.40% |
| EREL 100Ah with Bluetooth (manufacturer) | 12.8 V | 100 Ah | 98.26 Ah | 98.26% |
| Shentec 200Ah / 200A BMS (manufacturer) | 12.8 V | 200 Ah | 172.10 Ah | 86.05% |
Values are calculated from the unrounded averages and displayed to two decimal places. Links marked “manufacturer” lead to official brand websites. These may show a newer version or the current product range; the measurements apply to the original tested model.
19 of these 22 batteries meet or exceed their stated Ah capacity. The LiThink 280Ah and Supervolt 100Ah lead on relative capacity at approximately 110%. JUBE also performs strongly at 107.29%.
At the other end, the Shentec 200Ah sample delivered approximately 172.10Ah, or 86.05% of its rating. EREL and Power Queen OTCB Smart also fall below 100%, but their shortfall is much smaller, at around 1.7% and 1.6% respectively.
These are results for the tested samples when new. They do not establish the capacity of every production unit, and they do not measure how much capacity remains after years of use.
12V vs 24V: compare Wh as well as Ah
Two batteries can both say “100Ah” and store very different amounts of energy. The missing part is voltage. For nominal energy, multiply the rated Ah by nominal voltage:
- 12.8V × 100Ah = 1280Wh, or 1.28kWh.
- 25.6V × 100Ah = 2560Wh, or 2.56kWh.
- 12.8V × 280Ah = 3584Wh, or 3.584kWh.
That is why the 24V Dynesspower and Geleipu packs should not be treated as direct equivalents to 12V 100Ah models. They have twice the nominal energy, but also require a compatible system voltage.
Measured Wh are more useful when estimating runtime. Allow for your actual load and any inverter losses: energy taken directly from the battery is not the same as energy delivered at a 230V socket.
Why LiThink 280Ah is my preferred large 12V option
The LiThink 280Ah averaged 308.25Ah in the comparison data, equivalent to 110.09% of its rating. That makes it the strongest relative capacity result among these 22 models.
The attraction is the complete package, rather than the percentage alone: generous capacity, Bluetooth monitoring and self-heating. I also use this model in my own off-grid setup. For a substantial 12V installation, that combination makes it my first recommendation here.
It is a larger pack, so check the dimensions and your charging arrangement before ordering. For the detailed findings and practical limitations, see the LiThink 280Ah review on Charge-Test.
See current LiThink 280Ah pricing and options
Affiliate link — I may earn a commission at no extra cost to you.
The store link goes to LiThink’s German shop. Check delivery availability, tax treatment and the exact version offered for your country.
Smaller batteries: the exact model matters more than the logo
My experience with the tested LiTime, Power Queen, Redodo and WattCycle packs has generally been positive. Their capacity results are usually close to or slightly above the label rating.
That does not mean every product from those brands is identical. Bluetooth, low-temperature charging protection, case dimensions and current limits can differ. A good result for one model should not be treated as an endorsement of every battery with the same logo.
If you want an option between a typical 100Ah pack and the much larger LiThink, the Redodo 12V 165Ah review covers a compact alternative. For another smaller pack with monitoring and heating, see the LiThink 12V 100Ah TM review; that model is not included in the 22-battery table above.
Why I would usually choose a Bluetooth BMS
LiFePO4 voltage changes relatively little through much of a discharge. That makes a voltage reading a poor way to distinguish a mostly full pack from one with much less charge remaining.
A Bluetooth BMS can provide a more useful overview of current, voltage, temperature and estimated state of charge. Some also show individual cell voltages. That information is particularly valuable when solar charging varies from one day to the next.
The percentage is still an estimate. Its accuracy depends on current measurement, capacity settings and calibration. Bluetooth does not automatically guarantee a precise fuel gauge.
A battery without an app can still be a sensible purchase. An external shunt-based monitor offers another way to track charge going into and out of the pack.
What my long-term experience does—and does not—show
I have used LiFePO4 batteries in two off-grid solar installations for years. The setups described in the original comparison use a Creabest 300Ah battery and a LiThink 280Ah battery.
So far, I have not had a LiFePO4 battery fail during or after my testing. That is encouraging, but it is a personal experience across different products and ownership periods, not a statistical failure rate for the market.
Likewise, a capacity test does not verify a claim of several thousand cycles. A small initial capacity reserve is welcome, but it cannot establish long-term durability by itself.
Verdict: choose the right system first, then the battery
The main finding is reassuring: most of the batteries in this comparison deliver their advertised Ah capacity. There is no need to chase the highest percentage at the expense of system compatibility or useful features.
For a high-capacity 12V setup, LiThink 280Ah remains my preferred choice. If you need a smaller pack, shortlist a suitable Bluetooth model and compare its dimensions, current limits and price. For a basic 24V system, Dynesspower is worth considering if you can live without app monitoring.
My buying priorities are system voltage, available space, charge and discharge requirements, and a practical way to monitor the battery. Once those are right, the capacity results help narrow the shortlist.
Check the LiThink 280Ah at the official store (affiliate link) · Read the detailed LiThink 280Ah review


